What can you use on cradle cap
How to treat cradle cap
Diseases & conditions
- Coronavirus Resource Center
- Acne
- Eczema
- Hair loss
- Psoriasis
- Rosacea
- Skin cancer
- A to Z diseases
- A to Z videos
- DIY acne treatment
- How dermatologists treat
- Skin care: Acne-prone skin
- Causes
- Is it really acne?
- Types & treatments
- Childhood eczema
- Adult eczema
- Insider secrets
- Types of hair loss
- Treatment for hair loss
- Causes of hair loss
- Hair care matters
- Insider secrets
- What is psoriasis
- Diagnosis & treatment
- Skin, hair & nail care
- Triggers
- Insider secrets
- What is rosacea
- Treatment
- Skin care & triggers
- Insider secrets
- Types and treatment
- Find skin cancer
- Prevent skin cancer
- Raise awareness
- Español
Featured
How Natalie cleared her adult acneNatalie tried many acne products without success. Find out how a board-certified dermatologist helped Natalie see clear skin before her wedding.
When to treat molluscum contagiosumThis contagious skin disease will usually clear on its own, but sometimes dermatologists recommend treating it. Find out when.
Everyday care
- Skin care basics
- Skin care secrets
- Injured skin
- Itchy skin
- Sun protection
- Hair & scalp care
- Nail care secrets
- Basic skin care
- Dry, oily skin
- Hair removal
- Tattoos and piercings
- Anti-aging skin care
- For your face
- For your skin routine
- Preventing skin problems
- Bites & stings
- Burns, cuts, & other wounds
- Itch relief
- Poison ivy, oak & sumac
- Rashes
- Shade, clothing, and sunscreen
- Sun damage and your skin
- Aprenda a proteger su piel del sol
- Your hair
- Your scalp
- Nail care basics
- Manicures & pedicures
Featured
Practice Safe SunEveryone's at risk for skin cancer. These dermatologists' tips tell you how to protect your skin.
Relieve uncontrollably itchy skinFind out what may be causing the itch and what can bring relief.
Darker Skin Tones
- Skin care secrets
- Hair care
- Hair loss
- Diseases & Conditions
- Acne
- Dark spots
- Dry skin
- Light spots
- Razor bumps
- Caring for Black hair
- Scalp psoriasis
- Weaves & extensions
- Central centrifugal cicatricial alopecia
- Frontal fibrosing alopecia
- Hairstyles that pull can cause hair loss
- Acanthosis nigricans
- Acne keloidalis nuchae
- Hidradenitis suppurativa
- Keloid scars
- Lupus and your skin
- Sarcoidosis and your skin
- Skin cancer
- Vitiligo
- More diseases & conditions
Featured
Fade dark spotsFind out why dark spots appear and what can fade them.
Untreatable razor bumps or acne?If you have what feels like razor bumps or acne on the back of your neck or scalp, you may have acne keloidalis nuchae. Find out what can help.
Cosmetic treatments
- Your safety
- Age spots & dark marks
- Cellulite & fat removal
- Hair removal
- Scars & stretch marks
- Wrinkles
- Younger-looking skin
Featured
Laser hair removalYou can expect permanent results in all but one area. Do you know which one?
Scar treatmentIf you want to diminish a noticeable scar, know these 10 things before having laser treatment.
BotoxIt can smooth out deep wrinkles and lines, but the results aren’t permanent. Here’s how long botox tends to last.
Public health programs
- Skin cancer awareness
- Free skin cancer screenings
- Kids' camp
- Good Skin Knowledge
- Shade Structure grants
- Skin Cancer, Take a Hike!™
- Awareness campaigns
- Flyers & posters
- Get involved
- Lesson plans and activities
- Community grants
Featured
Free materials to help raise skin cancer awarenessUse these professionally produced online infographics, posters, and videos to help others find and prevent skin cancer.
Dermatologist-approved lesson plans, activities you can useFree to everyone, these materials teach young people about common skin conditions, which can prevent misunderstanding and bullying.
Find a dermatologist
- Find a dermatologist
- What is a dermatologist?
- FAAD: What it means
- How to select a dermatologist
- Telemedicine appointments
- Prior authorization
- Dermatologists team up to improve patient care
Featured
Find a DermatologistYou can search by location, condition, and procedure to find the dermatologist that’s right for you.
What is a dermatologist?A dermatologist is a medical doctor who specializes in treating the skin, hair, and nails. Dermatologists care for people of all ages.
Home Remedies and When to Seek Help
We include products we think are useful for our readers. If you buy through links on this page, we may earn a small commission. Here’s our process.
Healthline only shows you brands and products that we stand behind.
Our team thoroughly researches and evaluates the recommendations we make on our site. To establish that the product manufacturers addressed safety and efficacy standards, we:
- Evaluate ingredients and composition: Do they have the potential to cause harm?
- Fact-check all health claims: Do they align with the current body of scientific evidence?
- Assess the brand: Does it operate with integrity and adhere to industry best practices?
We do the research so you can find trusted products for your health and wellness.
Read more about our vetting process.Overview
Cradle cap, sometimes also called crib cap, is the baby version of seborrheic dermatitis. Seborrheic dermatitis causes dandruff in adults. In babies, it causes extremely thick and flaky skin on a baby’s scalp.
Cradle cap is common, mostly harmless, and should go away eventually. It’s most common in babies up to 3 months old, but it can last up to a year or longer. Most cases of cradle cap go away by a child’s first birthday, and cases continue to drastically decrease as a child approaches 4 years of age.
Cradle cap is usually located on the head and may concentrate behind the ears. Sometimes, it also affects the skin under the eyebrows or on the nose, armpits, or groin. The flakes may be either dry or greasy, and they are usually white or yellow.
Cradle cap is harmless and it’s not medically necessary to get rid of it. But if you want to try removing it, there are a few safe methods you can use at home. Most remedies are not scientifically proven to work and results will likely be temporary. Someday your child will simply grow out of developing cradle cap.
Always be gentle with baby skin. If you irritate the scalp too much you could cause tiny cuts, which might get infected.
1. Brush your baby’s scalp
Gently brushing your baby’s scalp is a good way to move some flakes off their head, but be careful not to pick or scrape at the flakes. You can find special brushes made just for cradle cap. Sometimes hospitals send you home with a brush following delivery of your baby. A new toothbrush with gentle bristles also works.
To use this method:
- Moving in one direction, slowly brush the affected area of scalp to loosen flakes.
- Continue brushing through the hair to remove flakes from each hair strand.
- You can do this on wet or dry hair.
Brush once a day. If the scalp becomes red or agitated, brush less often.
Brushing will remove some flakes and may promote overall scalp health. This is a safe method.
2. Hydrate the scalp
Hydrating the scalp is good for loosening flakes, and some people feel it nourishes the scalp underneath. You’ll need a pure plant oil, such as olive, coconut, jojoba, or almond oil. Baby oil also works. Whichever you choose, try a small amount on your baby’s scalp first to see if it causes any irritation.
To use this method:
- Apply a thin layer of oil to the scalp.
- Gently massage the oil in for about a minute. If your baby still has a soft spot on their head, use extra caution around this area.
- Leave oil to soak in for about 15 minutes.
- Wash the oil out with a gentle baby shampoo.
You can use this method once a day. Anecdotally, people find this method to be effective, but there’s no research to support it. As long as your child isn’t allergic to the oil, this is a safe method.
3. Wash baby’s hair
Proper hair hygiene can go a long way toward diminishing the appearance of cradle cap. A baby shampoo may be enough to help treat the cradle cap. Only use dandruff shampoo with your doctor’s permission because it might not be safe for your baby.
To use this method:
- Wet the hair and scalp.
- Massage shampoo into the scalp.
- Use a baby towel to lather shampoo and gently rub the affected areas. You may also try brushing your baby’s scalp while you shampoo.
- Rinse baby’s hair to remove all of the shampoo.
Ask your pediatrician how often they recommend you wash your baby’s hair. Too much shampooing might dry out the scalp and make cradle cap worse.
Shampooing is very effective for temporarily removing cradle cap flakes, and it’s very safe when using baby shampoo. Just be careful not to get soap in your baby’s eyes.
4. Apply prescription creams
In extreme cases, your doctor may recommend an antifungal, hydrocortisone, or zinc cream. Follow the instructions of your care provider while using them.
5. Try essential oils, if OK’d by your pediatrician
These highly concentrated oils are herbal remedies that contain the essence (active ingredient) of various plants. Using antimicrobial essential oils may help fight cradle cap caused by yeast (though this is an uncommon cause of cradle cap in babies). Anti-inflammatory essential oils may soothe the scalp.
When choosing an oil, consider lemon or geranium essential oil and a carrier oil such as jojoba or coconut oil. Some people also recommend tea tree oil, but this oil may not be safe for young babies and should be avoided on babies younger than 6 months.
To use:
- Dilute 2 drops of essential oil in 2 tablespoons of carrier oil.
- Apply oils to the affected area.
- Leave on for a few minutes.
- Comb or brush flakes off.
- Wash all oils off with shampoo.
This method should be used sparingly. It’s also unclear if it’s actually safe to apply any essential oils directly on a baby’s skin. Ask your doctor first and only follow the advice of a certified aromatherapist when using essential oils.
Causes
Not all babies get cradle cap. According to the American Academy of Family Physicians (AAFP), about 10 percent of baby boys and 9.5 percent of baby girls have it.
Cradle cap is very common, but little is known about what exactly causes it. This is one reason it may be hard to remove or prevent. In adults, there appears to be a link between seborrheic dermatitis and the Malassezia species of yeast, but the association is less clear in infants. It’s estimated that half of the population has some level of dandruff, which is also strongly linked to Malassezia yeasts.
Some scientists believe there’s a hormonal link since it appears at birth, goes away, and then often returns around puberty.
Sometimes — though very rarely — generalized cradle cap may be linked to immunodeficiency. If this is the case, there will be other symptoms in addition to just cradle cap, and your doctor can diagnose and treat your child.
When to seek help
Cradle cap is usually not urgent but it’s worth mentioning to your doctor at your child’s next check-up.
If the skin looks very red, infected, or agitated, call your doctor. You should also call if the cradle cap spreads to the baby’s face or body.
Cradle cap vs. infantile eczema
Cradle cap looks similar to infantile eczema, but a doctor will easily be able to tell the difference. Infantile eczema is usually itchy and cradle cap is not. If you’re worried about your baby’s cradle cap or want to learn more, ask your pediatrician at your next appointment.
Outlook
Cradle cap is mostly harmless and usually clears up on its own. Often it goes away by baby’s first birthday, though in some children it may not clear up until they are between 2 and 4 years old.
You can try some safe methods of cradle cap removal at home, but always be careful with products and when handling baby skin.
Anex official dealer | Stroller Anex Classic 2 in 1
Photo Review Careful Delivery Dealer Certificate
Description and characteristics of the stroller
Chassis
SOFT Cushioning
An improved classic cushioning system perfectly softens bumps and bumps on uneven road sections. nine0003
LIGHT WEIGHT AND HANDLING
Thanks to the aluminum frame and modern carrycot materials, the complete stroller weighs only 12.3 kg . Due to this, as well as due to the presence of bearings in the wheels, the stroller rolls very easily.
OPTIMUM CHASSIS WIDTH
The width of the chassis at its widest point (wheel caps) is 60 cm . The carriage will pass practically in any Russian elevator. nine0003
X-LOCK
All Anex strollers are equipped with a system of protection against accidental folding. Special locks automatically block the frame. To fold the frame, they must be pushed back.
ECO LEATHER HANDLE
The handle is made of practical and pleasant to the touch eco-leather. It does not overheat in the sun and does not harden in the cold, and it is also easy to clean from stains and does not fade in the sun. nine0003
HEIGHT ADJUSTABLE HANDLE
The stroller's handle has enough up and down adjustment to be comfortable for parents of all sizes.
COMFY-STOP BRAKE SYSTEM
The brake system is engaged and disengaged by simply pressing one pedal. Reliable brakes will not allow the stroller to budge. Press the top - the brake is on, press the bottom - you can go. nine0003
EASY TO TRANSPORT AND STORAGE
The stroller chassis folds compactly like a book. For even more compactness, the wheels can be easily removed.
CONVENIENCE IN THE STORE
A capacious basket made of metal mesh is securely attached to the frame of the stroller. Perfect for going to the store.
LARGE INFLATABLE WHEELS
Soft inflatable wheels with a diameter of 29see Inflated with a standard car (bike) pump. Thick rubber tire with good tread.
Stroller (used from approx. 7-9 months to 3-4 years)
ADJUSTABLE BACK AND FOOTBOOT
The back drops almost horizontally (only 4 positions). The leg can also be fixed in various positions (there are also 4 in total).
nine0081 SPACIOUS BED
Length bed 90 cm , width with insert (mattress) 25 cm, without insert - 30 cm .
DOUBLE LOCK
Due to the One-Click-Move system, the walking block can be installed both facing in the direction of travel and facing the mother.
SAFE-WALK
The five-point safety harness protects the child from slipping out of the stroller while walking. Soft inserts allow you not to press the straps on your shoulders. The system is easily adjusted to the individual size of the baby.
SOFT BUMPER
The bumper, together with the straps and jumper, reliably protects against falling and creates additional support for the baby. Particularly convenient is the function of opening the bumper on one side (to make it easy to put the child in the seat). nine0003
HARD MATTRESS
The mattress from 100% of cotton creates comfort when walking, softens shaking. When the baby grows up, the mattress can be removed to have more space.
HOOD FASTENING
The hood of the walking block fastens on flypapers on each side and on a lightning behind. Therefore, it does not hang out, and the wind does not blow through the cracks to the child.
Video review of stroller
beekeeper's table for draining honey from honey extractor - RF patent 2492638
The invention relates to beekeeping equipment The proposed table includes legs 2 and a cover 1 attached to them. At the bottom of the legs 2, two skids 3 are fixed, curved and directed in one direction. On the upper curved edge of the runners 3, a U-shaped support platform - a cradle 6, turned upside down in front view, is fixed by means of a swivel 5, to install a container for honey 7 on it. . 4 w.p. f-ly. 3 ill. nine0003
Claim
with the help of a hinged connection, a U-shaped support platform, inverted in front view, is fixed - a cradle for installing a container for honey on it.
2. A table according to claim 1, characterized in that the hinged connection of the support platform - cradle with the upper edge of the skids is made above the center of gravity of the container for honey installed on the platform, for example, a flask. nine0003
3. Table according to claim 1, characterized in that the angle of inclination of the table towards the support platform - cradle is made equal to 5-25° due to the execution of the lower plane of the support platform - cradle above the lower plane of the table skids.
4. A table according to claim 1, characterized in that the bending of the skids towards the tilt of the table begins at a distance of 0. 05-0.3 of the honey extractor diameter from the vertical axis of symmetry of the table.
5. The table according to claim 1, characterized in that the cover of the table is equipped with a honey extractor displacement limiter, made in the form of a shoulder along the perimeter of the table or from the side of its inclination. nine0003
Description of the invention to patent
The invention relates to beekeeping equipment, in particular to improvised means that facilitate the work of a beekeeper to the design of tables-stands for a honey extractor to drain honey from it.
A well-known design of the honeycomb uncapping table is a wooden box with a lid that folds back and rests on the stops at the back. At the bottom of this drawer is a second (drawer) drawer. See 2004-2009© Pchel Iventar LLC E-mail [email protected] Russia, Orenburg, 460050, PO Box 1749, tel./fax.+7(3532)526133 tel.+7-9033-90-10-44, 8- 9128-424-424/
The disadvantages of the known table include its limited technological capabilities when using it, for example, when carrying out other necessary maintenance work, such as draining honey from a honey extractor. In this case, you have to install the honey extractor on another stand or table that rises above the ground and, as the honey flows out of the honey extractor, independently tilt, substitute the stands or hold the honey extractor in an inclined position to completely drain the honey. And so every time when enough honey has accumulated in the honey extractor to drain. nine0003
The design of an ordinary table, consisting of a flat surface mounted on four legs, is widely known - a prototype. Such tables, when manufactured with appropriate sizes, are also used by beekeepers during periodic inspection of hives, the state of work of bee colonies and when pumping honey as a stand for a honey extractor. At the same time, when pumping honey, it becomes necessary to tilt the flask and hold it in an inclined position, which causes inconvenience in use, slows down the pumping process, which is quite laborious. At the same time, during the pumping of honey, a sufficiently large number of bees accumulate around, which fall under the honey extractor and other moving objects and die. nine0003
The disadvantages of the known table include the inconvenience in its use for pouring honey from a honey extractor and the high labor intensity of work associated with its limited technological capabilities, which consist in the need to tilt the flask when pumping honey, hold it in a given position, additionally put stands under flasks and stands under the edges of the honey extractor to ensure its inclination, which leads to a significant death of bees falling under the stands, supports, flasks, honey extractor during work. nine0003
The object of the present invention is to provide a stand for a honey extractor that reduces labor intensity and simplifies the work of pouring honey from the extractor, while ensuring the safety of bees.
The task is achieved by a combination of well-known features such as a table, including legs and a lid fixed to them, and new features consisting in the fact that on the legs, in their lower part, two runners, curved and directed in one direction, are fixed, on the upper curved edge of which, with the help of swivel fixed, inverted in front view, U-shaped support platform-cradle for mounting a container for honey on it. nine0003
The hinged connection of the supporting platform-cradle with the upper edge of the skids is made above the center of gravity of the container for honey installed on the platform, for example, a flask.
The tilt angle of the table towards the support platform-cradle is made equal to 5-25° due to the execution of the lower plane of the support platform-cradle above the lower plane of the table skids.
Bending of the runners towards the tilt of the table begins at a distance of 0.05-0.3 of the honey extractor diameter from the vertical axis of symmetry of the table. nine0003
The lid of the table is equipped with a honey extractor displacement limiter, made in the form of a shoulder along the perimeter of the table or from the side of its inclination.
The novelty of the proposed device is the implementation on the legs, in their lower part, curved and directed in one direction, two skids, on the upper curved edge of which, by means of a hinged connection, is fixed, inverted in front view, a U-shaped support platform-cradle for installation on it honey containers.
Thus, the presence of runners bent to one side allows the table, as honey flows out of the honey extractor and as honey accumulates in the drained container and its weight increases, to tilt itself, ensuring the complete flow of honey from the honey extractor without the participation of the beekeeper.
Signs of hinged connection of the support platform-cradle with the upper edge of the skids above the center of gravity, installed on the platform of a container for honey, for example, a flask, allows you to constantly maintain a flask or other container located on the platform-cradle in a strictly vertical position. nine0003
Making the angle of the table in the direction of the supporting platform-cradle equal to 5-25° due to the execution of the lower plane of the supporting platform-cradle above the lower plane of the table rails provides the slope necessary for draining honey.
Bending of the skids towards the tilt of the table, starting at a distance of 0. 05-0.3 of the honey extractor diameter from the vertical axis of symmetry of the table, allows the use of containers of various weights, ensuring that honey is drained from the honey extractor, since even with a slight tilt of the table, honey begins to flow out of the honey extractor. In this case, the supporting platform-cradle serves as a table tilt limiter. nine0003
Implementation on the cover of the table of the honey extractor displacement limiter, made in the form of a shoulder along the perimeter of the table or from the side of its inclination, prevents the honey extractor from moving along the surface of the table.
Conducted patent information studies allow us to conclude that the proposed design of the honey extractor table is new, industrially feasible, the signs are not obvious and are aimed at achieving the task set by the proposed invention. nine0003
Figure 1 schematically shows the proposed table in side view before the honey is drained from the honey extractor.
Fig. 2 is a schematic side view of the proposed table with a honey extractor during the draining of honey from the honey extractor.
Figure 3 schematically shows the proposed table, front view.
The proposed table for draining honey from a honey extractor consists of a lid 1 with legs 2 on which skids 3 are fixed in the lower part with a bend 4 in one direction. In the upper part of the bends 4 of the slides 3, a hinged connection of 5 bends with a support platform-cradle 6 is made, on which a container for honey 7 is installed.. The bottom of the support platform - cradle 6 in the initial position is located above the surface on which the table is installed. The beginning of the bends 4 of the runners 3 is made at a distance of 0.05-0.3 of the honey extractor diameter from the vertical axis of symmetry of the table, which ensures the tilt of the table with an increase in the weight of honey in the container located on the supporting platform-cradle 6.
Proposed table for draining honey from the honey extractor works as follows:
After the honey from the frames is at the bottom of the honey extractor 8 and a sufficient amount of it has accumulated, they start draining the honey from the honey extractor into flasks or other containers. To do this, a container 7 is installed on the support platform-cradle 6 under the honey extractor tap into which honey will flow. After opening the tap, honey begins to flow into the container. As the container 7 is filled with honey and it acquires more weight, the table with the help of skids 3 tilts towards the support platform-cradle 6. At the same time, the tilt angle of the table is limited by an angle of 5-25 °. As soon as the lower part of the support platform-cradle 6 reaches the surface on which the table is installed, the tilt of the table stops, and honey from the honey extractor 8 continues to flow out. A flask filled with honey enters the warehouse, a. the honey extractor is used to extract honey from the next batch of honeycomb frames.