How to remove child safety lock adhesive

removal - How do you remove the stick-on child safety locks from appliances?

Asked 12 years, 4 months ago

Modified 2 years, 4 months ago

Viewed 173k times

I have a few stick-on child safety locks, such as this one found on Amazon.

When it comes time to remove them, what should I do to avoid destroying the finish on the appliances? They are stuck on really well and won't budge by hand.

child-safety
removal

Try removing it first without removing the foam backing. You can dissolve the foam backing with constant application of WD-40 and scrubbing with a wet wash cloth. We had put some of that foam sticky tape on an old apartment door once and I found that by spraying it with WD-40 and scrubbing it, I was able to remove the foam tape and residue easily without removing any underlying paint or finish.

I had these on painted wooden cabinet doors. I slid dental floss behind the plastic part which cut the plastic latch off, leaving the foam adhered to the door. Then I peeled the foam off by hand and it did no damage. I couldn't believe how easy it was! I thought it was stuck for good.

If the adhesive is 3M VHB (Very High Bond), which I think is what they use for the 'command strips', and it doesn't have a foam backing on it, you can just put firm pressure on it to try to twist it. Hold it there under pressure, and it'll slowly release and pop loose after a few seconds.

If it's foam backed, this won't work, as the foam will absorb the force, keeping it from being applied to the adhesive.

Depending on the condition of the surface, how well the surface was prepped, and how long it's been left on (which I'm guessing is months), it's possible it might damage things -- I've had a number of times when I've taken paint off of walls with the stuff. Hard plastics and shinier finishs seem to hold up, so most appliances should be okay.

I used the hair dryer to soften the glue then scraped it off. It worked well but then I noticed my laminate cabinets started to bulge where I had heated it up! Something to be wary of if using the hair dryer method.

I inserted a flat head screwdriver and gently and slowly pulled forward until it gave way. If you don't tools hard/fast, the plastic clip will snap.

Wappa Baby child proof door lever lock. The devices were attached to Andersen outside factory painted doors, and were affixed to the doors for three weeks. I manually pried the unlocked device by pulling on the swivel part. Start slowly, it will pop right off. I did three locks, 10 seconds each. BTW, the locks worked very well for us.

I used the pointed end to a bottle cap opener and used it to pry off the base. An old fashion can opener the one that is pointed and makes a triangle opening. Separate the two top and bottom as if you were opening the drawer. The bottom piece has a square shape where the top snaps into. I used a metal bottle opener the pointed end and pried it off my cabinet drawer. It worked and took off the sticky part too. It worked so well I was able to reuse the latch and place it in the correct spot on the cabinet drawer. The first time I placed one I placed incorrectly on my drawer. The top was on my first drawer and the bottom was on my second drawer. Did not like this set up. Now the top is on the side of the drawer where the wall is and the bottom is on the drawer itself. My son can't get into this drawer.

Use a sharp toothless knife to cut the sticky part slowly. Takes 1 minute each

Use a hair dryer to soften the glue/backing and a paint scraper to pry/push the glue off.

The kind we had there was a very thin foam stuck to cabinet drawer.
All I did was stick a butter knife (blunt end) behind the lock and popped/pryed it off. The foam could then be fairly easily peeled off by pushing with a finger and rolling up and off. If a large piece of foam was left it was easier because you could get a hold of and edge and slowly peel it off. Clean up by just using a finger and rubbing over what was left and it will roll up to something that can be picked off. Final clean up using goo-off on a rag and sort of polish off any residue. All this done with out making a mess by spraying with WD-40 or using a lot of Goo-Off.

Thanks for everyones suggestions. Based on what you said, I removed the hard plastic portion of the lock. Then I used goo gone to soak the foam backing. After a minute I put high heat on the foam with a hair dryer and then took a wooden cuticle stick and scraped off the foam and glue. It took a little time but no harm came to my stainless steel ovens.

DONT USE WD 40 ON FINISHED WOOD! Used a large metal table spoon or serving spoon and wedged between gap in plastic and foam and used as lever and fulcrum. Came right off then saturated foam with liquid gold and let sit. Foam came right off and didnt hurt finish

I was able to use dental floss to "saw" off the plastic parts, then used a plastic scraper to scrape off the foam and most of the adhesive. Then I used Goo Gone to clean off what was left. Looks perfect!

Sign up or log in

Post as a guest

Required, but never shown

Post as a guest

Required, but never shown

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Child Proofing Cabinets: 11 Effective Baby-Friendly Solutions

Overview

Suffocation, drowning, and poisoning remain the leading causes of accidental deaths for children and teens aged 0-19 in the United States. This is according to the most recent data from the CDC (Center for Disease Control and Prevention.) (1)

Thank you for reading this post, don't forget to subscribe!

Childproofing your home, especially cabinets and storage spaces that contain dangerous products, can help minimize injury or death risks at home.

Childproof cabinets can help protect your child from injuries like slammed or pinched fingers. It also keeps them away from hazardous products and objects like knives & appliance blades, electric appliances, open fire, poisonous cleaning chemicals, etc.

And for you, mama, childproofing your cabinets can save you from unnecessary cleanups and set your mind at ease that your little crawler is safe.

In this article, we’re listing childproofing solutions you can choose from to keep your cabinets and drawers safe from curious little hands.

How Do You Childproof Cabinets Without Drilling?

There are five types of cabinet locks that don’t require drilling: adhesive, cord, sliding, magnetic, and spring-loaded latch cabinet locks. The first three are the external or visible babyproof locks, while the last two are the internal or invisible types.

One setback of no-drill cabinet locks is that they require at least 24 hours for the adhesive tape to cure fully.

Adhesive Cabinet Locks

These locks feature two anchor points joined together by a flexible strap. The idea is to stick these anchor points near the openings of two cabinet doors or around corners to lock appliance doors.

Pros Of Adhesive Cabinet Locks:

Easy installation. Clean the area where you intend to install the anchor points, remove the adhesive tape cover at the back, then firmly press on the surface.
No drill solution. For renters or those who don’t want to drill holes in their cabinets, adhesive locks are a good alternative to child safety cabinet locks.
Versatile. The multi-purpose design lets you install adhesive locks anywhere–the refrigerator or oven door, the trash can, or toilet seats. Basically, anything that opens can be installed with an adhesive lock.
Easy to remove. You can remove adhesive locks easily when you no longer need them.
Inexpensive.

Cons Of Adhesive Cabinet Locks:

Visible. It can be visually distracting if you’re using a lot of adhesive child safety locks.
Some brands stick better than others.

Popular Choice For Adhesive Cabinet Locks:

Munchkin Xtraguard Dual Action Multi-Use Latches

(Image source: amazon.com)

The dual-locking mechanism of Munchin Xtraguard child safety latches features a dual-button operation to dislodge. Simply press the release buttons on the sides, then rotate the anchor points out of the way to remove them.

Unlike other child safety locks that can be tedious to put back, the Munchkin Xtraguard also features an easy one-click-to-fasten design. This lessens the risk of not putting the lock back when you’re in a hurry.

Cord Cabinet Locks

This type of cabinet lock is best for knobs. Like the adhesive cabinet lock, cord cabinet locks require side-by-side cabinet doors.

To use, simply tie the cabinet door knobs together with the cord, push the cord stop up (similar to the cords on some hoodies or raincoats), then press the release button to dislodge.

Pros Of Cord Cabinet Locks:

Easy to install.
Simple, low-cost, and easy to use.
Reusable. Can be moved from one cabinet to another.
Portable. A childproofing cabinet lock solution you can take anywhere with you.
Perfect cabinet lock for surfaces that are difficult for adhesive locks to stick to.
No drill solution. Perfect for renters.
No tools required.

Cons Of Cord Cabinet Locks:

Doesn’t work on handles.
Some brands may be more durable than others.
Dangling cords may be eye-catching for curious toddlers.
May be easy for preschool-age children to figure out.
The multiple steps needed to lock and unlock can increase the risk of not being replaced when rushing.
Requires a neighboring knob to lock two doors together.
Don’t work well on drawers and most appliances.

Popular Choice For Cord Cabinet Locks:

Kiscords Baby Safety Cabinet Locks

(Image source: amazon.com)

Cord cabinet locks are perfect for those who don’t want to drill holes or install adhesives in their cabinets. This type of child safety cabinet lock is portable and can be moved from one cabinet door to another.

What separates Kiscords from other brands is that their cabinet locks are designed by a mama for mamas and are assembled in the USA by people with disabilities.

Choose between black or white colors to match your cabinets and drawers.

Kiscords Baby Safety Handle Locks

(Image source: amazon.com)

While cord cabinet locks are specifically-designed for knobs, these snap-buckle straps are designed for side-by-side cabinet handles.

The child safety mechanism is simple: it’s like two wire ties joined together by a snap buckle strap. To release, press the top and bottom parts of the straps. Another good feature of this babyproof lock is that the straps stay in place even when your cabinet doors are opened.

Although it can’t be reused and moved from one cabinet door to another, it’s still a good no-drill and no-adhesive childproofing solution. Cut the wires to remove them.

Choose between black or white colors to match your cabinets and drawers.

Sliding Cabinet Locks

If cord cabinet locks work best on knobs, sliding locks work best on side-by-side cabinet door handles. This is another simple, low-cost, and easy-to-install childproofing cabinet lock solution.

Sliding locks are typically simple plastic U-shaped locks that you loop around cabinet door handles. Some sliding locks feature “teeth” or jagged sides that lock into a sliding piece, while some designs come with a separate lock that you pinch to attach at the end.

To release, squeeze the sliding piece, then remove the locking strip or piece.

Pros Of Sliding Cabinet Locks:

Works best on handles but may work on some knobs depending on the diameter.
Can be installed in seconds.
Can be moved from one cabinet to another.
Portable. A child safety lock solution you can bring with you.
Reusable. Can be used again and again.
Perfect cabinet lock for surfaces that are difficult for adhesive locks to stick to.
No drill solution. Perfect for renters.
No tools required.

Cons Of Sliding Cabinet Locks:

May be easy for older children to figure out.
Only works for handles or knobs up to 5 inches apart. Measure before you order.
Some brands may jam or break easily.
Some styles may not fit with your cabinet handles.
Requires a neighboring door handle to lock two doors together.
Don’t work well on drawers and most appliances.

Popular Choices For Sliding Cabinet Locks:

Jool Baby Sliding Locks

(Image source: joolbaby.com)

These child safety sliding locks are compatible with knobs or handles up to 5 inches apart. They’re easy to install and use for parents but difficult for toddlers to figure out. The durable design assures that your childproof locks will grow with your child.

Jool Baby also offers a lifetime satisfaction guarantee on their products.

Adoric Sliding Locks

(Image source: adoriclife.com)

Adoric sliding cabinet locks feature an adjustable, extra-long U-shaped latch compatible with handles up to 5 inches apart. Lock, unlock, and adjust the lock length by squeezing the buttons.

This reusable and multipurpose babyproof lock can also be used for double-door refrigerators.

Safety 1st Outsmart Slide Lock

(Image source: amazon.com)

Safety 1st’s Outsmart slide lock features a unique decoy button to “outsmart” your toddler. The prominent decoy button is placed in the middle but will not do anything even if your child presses it.

The real button to release the lock is hidden in the flexible surface where parents can easily access it.

Magnetic Cabinet Locks

Magnetic locking systems are available with screws or adhesive. Magnetic child locks typically come with a magnetic key and several locks. To use, simply attach these child locks to cabinets and drawers, then hold the magnetic key in front of the lock to dislodge it.

When the cabinets and drawers are closed, the magnetic locks latch shut, and only the magnetic key can open it.

Tip: Put stickers on the outside of your cabinet or drawer doors where the magnetic key should go to dislodge the locks.

Pros Of Magnetic Cabinet Locks:

Easy installation. If you’re using the adhesive type, clean the area where you intend to install the locks, remove the cover of the adhesive tape at the back, then firmly press on the surface.
Completely locks cabinet doors, leaving no gaps that could pinch tiny fingers.
Invisible. There’s no risk of your child dislodging the lock unless they learn how the magnetic key works.
Doesn’t affect how your cabinets look.

Cons Of Magnetic Cabinet Locks:

Requires drilling if your cabinets are made of particleboard.
Risk of losing the magnetic key.
The constant need for the magnetic key whenever you need to open your cabinets and drawers.
Requires precision fit, which can make installation tedious for some.
The magnet may not work on thicker cabinet doors or drawer walls.

Popular Choices For Magnetic Cabinet Locks:

Eco-Baby Magnetic Cabinet And Drawer Locks

(Image source: amazon.com)

This is an adhesive type of magnetic lock. It features strong 3M adhesive tape that will stay put once properly installed. It’s a good no-drill option for cabinets, cupboards, and drawer locks.

Each kit includes 12 cabinet locks, two magnetic keys, an installation cradle, a ruler, and a spare 3M adhesive tape.

Jambini Magnetic Cabinet Locks

(Image source: amazon. com)

One of the pros of magnetic locks is that they are invisible from curious eyes and eager hands. Jambini magnetic locks are a good option for that purpose. It also uses strong 3M adhesive tape that could lift up to 10 pounds of weight.

Choose between four cabinet locks and one magnetic key or eight cabinet locks with two magnetic keys.

Safety 1st Adhesive Magnetic Locks

(Image source: amazon.com)

Here’s another good option for internal cabinet locks that are out of your toddler’s sight. The Safety 1st magnetic locks also feature the easy peel and stick installation and work with a magnetic key.

What sets Safety 1st apart is that it has a disengage feature that keeps specific locks unlatched when not in use. This saves you from frequently locking and unlocking your cabinet doors and drawers each time you reach for something.

Additionally, it comes with a template to help ensure proper alignment every time.

Available in a pack of 16 cabinet locks and four magnetic keys.

Vmaisi Cabinet Locks

(Image source: vmaisisafety.com)

Childproof cabinet locks keep your toddler safe, give you peace of mind, and save you from unnecessary cleanups. The Vmaisi magnetic locks are easy to install, use, and maintain.

Vmaisi baby proofing magnetic locks are available in packs of 12, 16, 20, 24, and 36.

Spring-Loaded Latch Locks

Like magnetic locks, spring-loaded safety latch locks are available with screws or adhesive.

This type of cabinet lock typically comes in two parts: one goes inside your cabinet (the latch), and the other is attached to the inside of your cabinet door (the hook).

Installation Instructions:

Clean the area where you intend to install the child safety latches.
Place the latch and the hook in the cradle.
Peel off the adhesive tape covers.
Firmly press the latch on the inside of your cabinet.
Close the cabinet door so that the hook will attach to the inside of your cabinet door. This ensured proper alignment.
Switch on the lock, then close the cabinet door again.
The hook should now keep you from completely opening the cabinet door. This is how you know that you’ve installed it properly.
Press the button on top of the lock to release the latch and open the cabinet door. Some brands include a stick you can use to press the lock release button.

Pros Of Spring-Loaded Latch Locks:

Baby proofing cabinet lock option that works well with babies and young children.
Invisible. Doesn’t affect how your cabinets look.
Does not require a neighboring door to anchor or latch onto.
Ideal for drawers.
Easy to use once properly installed.
No keys required.
No fidgeting with strap locks.

Cons Of Spring-Loaded Latch Locks:

More difficult to install.
Older kids can easily dislodge.
Allows an opening that may be wide enough for eager little hands to get ahold of what’s inside your cabinets or drawers.
Some brands stick better than others.
Not as user-friendly as the other options.
More prone to breakage and replacement.

Popular Choice For Spring-Loaded Cabinet Locks:

Inaya Child Safety Latches

(Image source: inayababy.com)

The Inaya spring-loaded safety latches are invisible, convenient, and durable. It works on all surfaces, although it requires at least 24 hours of adhesive tape cure time, just like all other adhesive cabinet lock solutions.

It’s available in packs of eight; each comes with a 1-year warranty.

DIY Childproofing Ideas

Rubber Band

Wrap a rubber band around two neighboring cabinet door knobs to lock them together. Use multiple rubber bands if needed, and choose durable rubber bands that’ll hold over time.

Yard Stick

This method will work best for vertical cabinets and drawers with handles. Simply slide a yardstick, ruler, or similar object between the handles. The trick is simple but may be difficult for your toddler to figure out.

Place Them High

If you don’t prefer these childproofing tricks, you can place dangerous items on higher shelves out of children’s reach.

How Many Child Safety Locks Do I Need?

Tips Before Buying Cabinet Locks

Familiarize yourself with different types of child safety locks to determine which ones fit what you need.
If you’re renting, go for no-drill childproofing solutions.
Walk around the house and inspect every room. Count all the cabinets, drawers, and appliances that will require locks, and determine which type of lock is best for each of them.
Write it down to make sure you don’t miss anything.

Tip: Consider putting locks on everything that opens, like toilet seats, trash cans, storage boxes, etc.

Put locks even on spaces that don’t store dangerous products. Otherwise, you’ll be finding things on the floor every day.
Consider babyproofing away from home. This means stocking up extra portable cabinet locks like cords and sliding locks for hotel stays or visits to grandparents and relatives.
Discuss babyproofing with your daycare provider, and buy extra locks for them.
Check with JPMA (Juvenile Products Manufacturers Association) and CPSC (U.S. Consumer Product Safety Commission) for product recalls and updated safety standards.

Child Proof Cabinets FAQs

Do Magnetic Baby Locks Work?

Yes. Magnetic locks and all other childproofing cabinet locks can be effective as long as they are installed and used properly. The best baby safety locks are the ones installed in your home to keep dangerous products away from your child.

How Do You Baby Proof A Lazy Susan Cabinet?

There are various cabinet door locks you can use to babyproof your lazy susan cabinet. If it’s a two-door cabinet, adhesive, cord, and sliding door locks may be the best option.

If not, and you prefer the lock to be hidden, magnetic and spring-loaded latch locks may be best.

How Do You Baby Proof Open Kitchen Shelves?

Make sure your open kitchen shelves are stable or mounted to the wall so there’s no risk of them tipping over your toddler.
Remove breakables and dangerous products from the lower shelf.
Place breakables and dangerous products on the top shelves.
Install a baby gateon the kitchen entrance.
Or set up a safe, enclosed area to keep your baby away from the kitchen.

How Can I Keep My Cabinets Locked?

Use childproofing cabinet locks. There are adhesive, cord, sliding, magnetic, and spring-loaded latch types to choose from.

You can buy these locks on Amazon or other online marketplaces, or use rubber bands, yardsticks, or wire ties to keep your cabinets locked.

How Do I Lock My Cupboards?

You can use invisible or internal cabinet locks like magnetic or spring-loaded latch locks. Another option is visible, aka external cabinet locks like adhesive, cord, or sliding locks.

How To Childproof Cabinets Without Knobs?

For cabinets without knobs, internal child locks like magnetic and spring-loaded locks are best.

What Happens If I Lose My Magnetic Key?

You can use any strong magnet to disengage magnetic child locks or purchase a spare magnetic key.

Magnetic Cabinet Locks Vs. Adhesive Cabinet Locks

Magnetic and adhesive cabinet locks both have their pros and cons. Although magnetic cabinet locks are also available with adhesive, it’s a trending choice for those who want invisible cabinet locks that don’t affect how their cabinets look.

On the other hand, adhesive cabinet locks are more versatile and can be used in almost anything that opens. This includes toilet seats, trash cans, and appliances doors like refrigerators, ovens, dishwashers, etc.

How To Remove Child Proof Cabinet Locks?

Steps to remove no-drill adhesive locks:

Warm the adhesive tape with a hairdryer to soften it and make it easier to remove.
Slide a credit card or a string of dental floss on one corner of the adhesive tape to pry it loose. This will help keep your nail from damaging your cabinet’s paint.
Remove any residual adhesive with rubbing alcohol.

How Do You Babyproof Your Home?

Babyproofing is an ongoing process that begins when your little one starts to crawl, around six months of age. (2)

That said, it’s important to childproof your home to keep away everything that can pose a danger to your little crawler.

As a general rule, make sure you hide the following in locked cabinets or top shelves where your toddler can’t access them:

Cleaning products
Personal hygiene products
Automotive supplies
Gardening tools and chemicals
Medications and vitamins
Pantry items
Hot water, liquid, or food
Small items that can be choking hazards
Cords that can be strangulation hazards
Electrical cord and outlets
Sharp objects
Breakable objects
Important documents
Valuables

How Do I Toddler Proof My Kitchen?

Install a baby gate on the entrance, or keep the kitchen door locked.
Install child safety locks on cabinets, drawers, trash cans, appliances, and anything that opens.
Hide breakables and dangerous products like cleaning materials.
Hide knives, blades, and other sharp utensils.
Wall mount shelves.
Unplug electrical appliances, hide cords, and install outlet covers.
Install stove knob covers.

Read our comprehensive list for babyproofing your home one room at a time.

How Do You Child Proof Sharp Edges?

Install corner guards and edge bumpers to keep your child from bumping on them.

How To Stop Toddlers From Opening Doors?

Install doorknob covers to stop your toddler from opening doors. You can also install drawer latches and cabinet locks to stop your little one from opening storage doors.

Can You Lock A Toddler In Their Room?

It’s not advisable to lock toddlers in their rooms. Doing so can be scary for them or be considered a punishment. (3)

Additionally, it can be dangerous in an emergency.

REFERENCES

(1) https://www.cdc.gov/injury/features/child-injury/index.html

(2) https://helpmegrowmn.org/HMG/HelpfulRes/Articles/BabyMilestones/index.html

(3) https://www.nationwidechildrens.org/specialties/sleep-disorder-center/bedtime-problems

what is needed for the safety of the child in the apartment

A safe environment is created to protect yourself from accidental household injuries. We will tell you what ways there are to secure every corner if there is a child at home.

Corner covers
Window locks
Door stops and stops
Plugs for sockets
What other elements of the house should be secured

A safe home is one that minimizes the risk of injury. This is a place where you can leave your child to play for a while without supervision. And do not be afraid at the same time that he may accidentally hit his forehead on the corner of the table, get to important documents or open the window on his own. An environment that is familiar and invisible to adults can be dangerous for a child who is fully aware of the world.

Special accessories help to increase the level of safety in the house. These are inexpensive and easy-to-install useful household items that will save you from trouble. The most popular are:

limiters;
window locks;
plugs for sockets;
corner pads;
door locks.

In this article we will tell you what each of them is useful for and what features of accessories and their application you should pay attention to before buying.

Corner pads

Flexible soft corners and tape, which are attached to the corners of furniture, will protect not only small ones, but also adults from bruises. It is especially useful to have additional corner protection when the children in the family take their first steps. At this time, they often lose their balance and fall.

They are made using health-friendly foam rubber with increased strength and elasticity or soft silicone.

Tape is available in lengths of 1 and 2 meters, corners of various shapes. The color of the tape and corners is easy to match the color of the furniture. These accessories are attached to a special Velcro adhesive that leaves no residue.

Locks for windows

A reliable obstacle on the way to window openings - window locks.

On sale you can find a variety of locking window devices that will not allow children to open the window without parental permission out of curiosity or pampering.

The locks limit the movement of the sashes - it will no longer be possible to open the window wide and ventilate the room in a quick way. But safety comes first.

The classic method can be used to lock the window: the handle-key. In the place where the handle should be, a “closed” pad and a rotary mechanism are mounted. The window can only be opened using the key handle.

See also: How to choose a playpen

An alternative option would be a handle fixed in the window with a button (“pressed-turned”). But a child can quickly learn to bypass such protection.

There is also a special "child" lock for the window. It is installed at the bottom of the frame, consists of two parts that are securely fastened together - a key is used. This option allows you to use the window depending on the weather - open for ventilation or completely close. In this case, you only need the key to open the window wide open.

Among the obvious disadvantages of this protection option: the lock may not fit the installed window. In this case, it is worth considering the method of installing the lock in the frame - mortise mounting.

Door stops, latches and interlocks

Cabinet doors are like a magnet for little ones. To prevent injury and make cabinet shelves inaccessible, use special locking devices.

The interior door stopper is useful to prevent the door from slamming shut and pinching the child's fingers. The latch will also help out in the case when the elements of the door, when fully opened, can damage walls or furniture.

There are two types of door locks:

floor lock prevents door movements;
lock on the side of the door: a shock absorber is installed and does not allow it to slam shut completely.

Another type of potentially hazardous item is household appliances, plumbing fixtures with lids, and small boxes. Universal blockers will help to fix the microwave oven, refrigerator, dishwasher and even the toilet bowl.

To prevent children from getting to detergents, sharp and breakable objects, a furniture silicone blocker is useful - a strap that is fixed with fasteners on the sides and connects a cabinet or chest of drawers door to the body, or two hinged doors to each other.

Fix the bollards to the surface with a strong adhesive backing. After removing the elements, the adhesive is easy to remove, it does not leave marks on the surface.

Plugs for outlets

Outlets attract the attention of children all the time, so it is very important to protect your child from possible electric shock. Plugs for sockets will help to avoid trouble.

The most common plug for a socket is a plug, the size of a socket. The pins inserted into the outlet holes additionally hold the plug, so it is almost impossible for a child to pull it out. Plugs are usually made of plastic with an additional sealed gasket made of rubber or silicone.

More advanced socket covers use a locking key.

You can also find a simplified version of such protection on sale - the task of decorative plugs is to “hide” the socket in the interior.

What other elements of the house should be secured?

Will guarantee that the little explorer will not tip the TV over by pulling on it;

stair gate. If the house has several floors, then the entrances to the stairs from above and below must be fenced with special gates;

cover for cooker handle. Protects, for example, from accidentally turning off the gas supply. It latches like a case, and you can open it only by pressing in a certain place on the lid.

straps. Used for the safe operation of furniture such as cabinets, chests of drawers and wardrobes. One part is securely screwed to the wall, and the second - directly to the furniture. Thanks to this fastening, it is impossible to overturn furniture.

Make your home even more comfortable, calm and safe place with the Shop.by catalog. Choose latches, plugs, blockers and other accessories for the safety of your loved ones.

How to remove a broken key from a door lock: methods, instructions, videos

Sometimes there is a problem associated with a broken key in the door lock. This is a rather unpleasant situation, but if you follow simple recommendations, you can find a way out of it on your own. In this case, it is important not to panic, so as not to harm even more. How to extract a broken key from a larva?

Reasons for breaking the key inside the lock

The following main reasons why a breakdown occurs can be distinguished:

wear of the lock and key;
the ingress of dirt and foreign objects into the secret mechanism of the lock;
incorrect opening of the lock;
attempts to turn the key in the lock using various tools;
use of bad keys.

Types and characteristics of locks

There are the following types of locks:

1. By mounting type:

Mounted. These are locks, the fastening of which is carried out by threading the shackle into the eyes. Padlocks are easy to install and replace. However, they have a rather low burglary resistance. Scope of application - sheds, warehouses, basements, garages.
Mortise. These are the most commonly used locks installed directly inside the door leaf. It is advisable to embed them in metal doors, where they are protected from drilling by a sheet of metal. The lock mechanism must have high resistance to opening, secrecy, reliability and durability.
Overhead. Installed on the surface of the door leaf. Can be used for wooden and metal structures. They are characterized by ease of installation, repair and replacement, but they are not sufficiently resistant to hacking attempts.

2. Type of locking mechanism:

Crossbar (rack). Inside them is a crossbar with teeth and machined grooves. These locks have low burglary resistance, so their use to protect valuable items is not recommended.
Level. This is the most reliable type of locks with a secret part in the form of plates (lever). The more levers, the more reliable the lock (preferably 6-8). Often, lever locks can be combined with other security systems.
Cylinder. The design of the lock provides for a mechanism consisting of a cylinder, a larva and a lever mechanism. Cylinder locks are characterized by high reliability. They are single or double sided, single or double row.
Code. Are applied to protection of gates, access doors and internal rooms. They do not require a key, but due to the low degree of security, their use is limited.
Electromechanical. By their design, they are similar to traditional mechanical locks, however, they can be opened and closed at a distance. Can be mortise and overhead.

Required tools

How to get a broken key from a door lock? The work is carried out using the following tools:

screwdriver;
hairpin;
pliers;
pliers;
tweezers;
jigsaw;
hammer, etc.

As a rule, it is enough to use only 2-3 of these tools.

Fragment recovery methods

To extract a broken key, different methods are used, which are grouped in this way:

Sparing. You can try to remove the chip without destroying the castle. First, it is recommended to lubricate the lock with oil or grease. Next, the chip can be pulled out with tweezers or pliers.
With extraction/damage of the lock. If gentle methods are not effective enough, it is required to disassemble the lock. Sometimes it can be restored, but usually it needs to be completely replaced.
Rough. Sometimes traditional methods of extracting the debris are useless. You have to resort to a rough breaking of the door. Instead of trying to break the door yourself, it is better to turn to professionals.

What not to do

In some situations, key fragments are tried to be glued together with glue. However, this method is inefficient, since there is a possibility of the debris jamming, which further complicates the matter. Also, chemical elements can get inside the castle, which will require replacement of the larva.

Gentle methods

How to remove a broken key from a larva? This can be done in the following ways:

Self-tapping screw Applies only to thick keys. It is planned to drill a hole in the place of breaking and screw a self-tapping screw into the lock. Then the self-tapping screw is captured by pliers and removed along with the fragment.
Jigsaw file. This is one of the most effective ways. The file must be inserted under the key and turned so that the teeth are located on top. The chip is captured and removed.
Fishing hook. This is a rather difficult, but effective way. To remove the remnants of the key, it is worth straightening the hook by inserting a serrated tip into the hole. When engaging the key, carefully pull it towards you.
Pliers. Pliers are in demand in the presence of a large fragment protruding from the keyhole. First you need to lubricate the lock, and then pull out the key. Everything must be done carefully, without the use of excessive force.
Vibration. This technique is recommended when the key is broken inside the disc lock. The pins are lubricated first. Then, using a thin screwdriver, the code elements are set to their original position. Then tapping with a hammer on the lock is made. Under the influence of vibration, the chip is pulled out and removed with the help of pliers.
Pulling the fragment with a metal tube. Recommended for level locks. It is necessary to take a tube made of copper or brass, which is put on a protruding pin. Next, you should melt its end with a soldering iron and attach it to the fragment. After solidification, the tube must be pulled out along with the broken key.

Methods with extraction/damage of the lock

If it is impossible to extract the fragment, the following basic methods are used:

Pulling out the lock cylinder. The following algorithm of actions is provided: the end of the cylinder is clamped with a gas key and folded, and then the locking mechanism is opened with a screwdriver. If the larva cannot be removed, you must first remove the decorative trims and return them back after replacing the larva.
Prying the core. Using an awl or hairpin, you can pry off the lock cylinder. The tool is inserted into the keyhole, then the crossbars of the secret mechanism are raised. You need to work more carefully, otherwise there is a risk of damage to the lock.
Cylinder drilling. It is possible to drill the cylinder mechanism with a drill. Then he turns a little and is removed from the door.
Knocking out the lock. The cylinder can be knocked out with a hammer, after removing the armor plate. However, in this case, the lock will need to be replaced.
Dismantling the castle. You can disassemble the lock in detail after removing it from the door leaf. This method is highly reliable. However, it can only be implemented if there is an open door.

Rough methods

Breaking the door is required when other methods are ineffective, the presence of children in a locked house or heavy smoke in the room. It is highly desirable not to bring to this, but to invite highly qualified specialists with extensive experience and specialized tools.

The main methods of breaking the door include cutting the bolts of the lock with a grinder. It is possible to cut the lock, but this can ruin the door. You can also consider cutting the hinges, but this is not always feasible due to the presence of special protection on many doors.

Periodically inspect the mechanism and lubricate the lock. Immediate repair of the secret mechanism is recommended if jamming is detected. It is advisable not to use a bent or broken key.

Who to contact for help?

In the event that you are unable to solve the problem on your own, it is recommended to seek help from highly qualified professionals:

ZhEK. Specialists usually arrive no later than 1 hour later. They try to open the door through gentle techniques. Masters have the right to demand an identity card from the owner of the apartment. In the event that the living space is rented, it is necessary to agree with the owners so that they arrive with documents.
Commercial Services. Before contacting employees of commercial companies, you need to make sure that they have special work permits and a contract for the provision of services. In turn, they may demand from the owner of the apartment a passport confirming registration in the living space. If companies do not have the necessary documents, the fee for the provision of services can increase significantly.